PremiumLine Frost-protected safety shower for the body with Eye-/face wash unit, basin, and cover, stainless steel, for floor mounting
B-SAFETY’s frost-protected, heated safety showers are equipped with a self-regulating trace heating cable and additional insulation. An integrated thermostat provides additional protection for the heating system. The Safety shower is clad on the outside with stainless steel sheets. This ensures maximum durability even in harsh industrial environments. The modular design with bolted valve covers ensures easy access to valves and fittings during maintenance. Concealed high-performance shower heads prevent vandalism and also deliver high flow rates for rapid decontamination. The shower is activated via stainless steel pull rods or foot-operated controls such as tread plates or foot levers. These showers cannot freeze, even under the most extreme conditions.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN-15154-1:2025
• EN 15154-2:2006
• EN 15154-5:2019
• ANSI Z358.1-2014
Technical specifications
| Mounting type | Floor mounting |
|---|---|
| Material | ABS plastic, stainless steel |
| Colour | silver-gray |
| Height (mm) | 2300 |
| Width (mm) | 378 |
| Length/Depth (mm) | 806 |
| Operating pressure (bar) | 2 – 8 |
| Operating pressure of eye shower (bar) | 2,5 – 5 |
| Volume flow (l/min) | 50 ±10% tolerance |
| Flow rate of eye shower (l/min) | 14–20, with a tolerance of ±10% |
| Water connection | 1 1/4″ male |
| Water drain for eye shower | 1/2″ male |
| Electrical connection | 230 V – 50 Hz |
More about this product
Product description
The B-SAFETY PremiumLine series body safety showers are made of stainless steel and are suitable for use in laboratories and research facilities as well as for harsh industrial environments. The polished stainless steel surface is not only resistant to many chemicals but also offers a modern design for laboratories and cleanrooms.
The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of limescale and maintenance-free, as well as very robust and corrosion-resistant. The limited, even, and above all gentle water stream is optimized for rinsing chemicals off the skin.
Technical Description
- Stainless steel base with 4 mounting holes, dimensions 200 x 200 mm
- 1 1/4-inch stainless steel riser, two-piece, with a 1 1/4″ male water inlet at the bottom; total height 2300 mm
- 1 1/4-inch stainless steel connecting tube, 75 mm long
- 1 1/4-inch stainless steel ball valve, with Pull rod actuation, DIN-DVGW tested and approved
- Stainless steel pull rod with ring handle, 700 mm long
- 1 1/4-inch stainless steel wall shower arm, 600 mm reach
- High-performance shower head made of chemical-resistant plastic, black, with an improved spray pattern, corrosion-resistant, largely limescale-resistant and maintenance-free, very durable, self-draining
- Insulation made from a rock wool molded package, noncombustible, in accordance with DIN 4102
- Heating via self-regulating heating tape; power consumption for body shower: 10 W/m; power consumption for Eye shower: 25 W/m; electrical connection: 230 V – 50 Hz
- Outdoor air thermostat and energy-saving circuit (traces heat turns off at 11° C, turns on at 4° C)
- External piping casing and insulation made of a bolted stainless steel housing, easily removable for maintenance work, including green/white warning strips for better visibility of the shower
- Information sign for a body safety shower in accordance with DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, dimensions 150 x 150 mm, visibility distance 15 meters
- Integrated PremiumLine Eye-/face wash unit with catch basin and cover, for mounting on a standpipe; position and orientation can be freely selected
- Housing, cover, and drip tray made of impact-resistant and UV-resistant ABS plastic; 1/2″ male drain connection
- Integrated hinged protective cover to prevent dirt from getting in
- Triggered by swiveling the cover downward
- 3/8-inch stainless steel ball valve, with lever operation via a hinged protective cover, DIN-DVGW tested and approved
- Brass spray regulator with a very narrow spray pattern, chrome-plated
- with a built-in 3/8-inch flow control valve for adjusting the desired spray height and flow rate
- Includes an information sign for the eye shower on the cover, compliant with EN ISO 7010 and ASR A1.3; dimensions: 170 x 170 mm; visibility distance: 17 meters
- Suitable for use in Zone 1 and 2 hazardous areas; all electrical components are explosion-protected; includes a risk assessment in accordance with the Industrial Safety Regulation regarding non-electrical and electrical explosion protection
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN-15154-1:2025, DIN EN 15154-2:2006, and EN 15154-5:2019
- DIN-DVGW tested and certificated
accessories
