PremiumLine Self-Draining Eye Shower with Drip Tray, Stainless Steel, for floor mounting
The self-draining safety showers and eye showers are suitable for use in hot environments and tropical climates, where the sun can heat the standing water in the safety shower pipes to temperatures as high as 50°C, which can cause severe shockand scalding when the shower is activated.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN 15154-2:2025
• ANSI Z358.1-2014
• DIN-DVGW, NW-0417CL0263
Technical specifications
| Mounting type | Floor mounting |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 1050 |
| Width (mm) | 275 |
| Length/Depth (mm) | 550 |
| Weight (kg) | 10,0 |
| Operating pressure (bar) | 2,5 – 5,0 |
| Volume flow (l/min) | 14 ±10% tolerance |
| Water connection | 1″ male |
| Water outlet / drain | 1 1/4″ male |
More about this product
Product description
The design of these models allows standing water to drain out of the riser pipe, ensuring that only lukewarm water is used in an emergency. The valve is located directly above the water inlet; the vent pipe is then installed above it so that standing water can drain into the floor. The standpipe fills with water only when the shower is turned on. The water drains out again when the valve is closed. This prevents standing water in the standpipe from overheating due to sunlight and eliminates the risk of scalding for the person seeking assistance.
The eye shower is equipped with two B-SAFETY high-performance spray heads that not only meet the requirements of EN 15154-2:2025 and ANSI Z358.1-2014, but also ensure wide-area water distribution. This ensures that the areas around the eyes are also covered, and positioning the eyes within the water stream is straightforward. The controlled, even, and—above all—gentle water stream is optimized for flushing chemicals out of the eye.
Technical Description
- Stainless steel base with 4 mounting holes, polished, diameter 200 mm
- 1 1/4-inch stainless steel standpipe, polished, total height 1050 mm
- 1-inch stainless steel ball valve, includes self-draining feature up to the top edge of the valve near the floor; 1″ male water inlet; DIN-DVGW tested and approved
- Plastic foot pedal control, total width 240 mm
- Stainless steel connection pipe for easy installation and alignment of the shower, polished
- Integrated automatic flow regulator: 14 liters per minute, +/-10% tolerance, for a standard-compliant spray pattern at a specified operating pressure range of 2.5 to 5 bar
- High-performance, wide-spray stainless steel spray heads, polished, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-sealing Dust cap with a folding mechanism, mounted via a Distributor fork
- Stainless steel drip pan, 275 mm in diameter, polished, 1 1/4″ male drain connection
- sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- Overall height 1,050 mm, projection 375 mm, overall width 275 mm
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014 and EN 15154-2:2025
- DIN-DVGW tested and certificated
accessories
