ClassicLine hand-held eye shower with two spray heads 45° for wall- and table mounting
Two showers in one – this is possible by the unique construction of these showers: hand-held eye showers can be used as a fixed eye shower in the holder; or can be removed from the bracket to help injured people lying on the ground as hand-held shower.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
- EN 15154-2:2025
- ANSI Z358.1-2014
- DIN-DVGW, NW-0417CL0263
Technical specifications
| Mounting type | wall- and table mounting |
|---|---|
| Version | 2 spray heads |
| Material | brass, plastic |
| Colour | grey, green, orange |
| Width (mm) | 145 |
| Height (mm) | 310 |
| Length/Depth (mm) | 65 |
| Weight (kg) | 0,95 |
| Hose length (mm) | 1500 |
| Operating pressure (bar) | 2,5 – 5,0 |
| Volume flow (l/min) | 14 ±10% tolerance |
| Water connection | 1/2” female |
More about this product
Product description
The hand-held eye shower is equipped with two B-SAFETY high-performance spray heads that not only meet the requirements of EN 15154-2:2025 and ANSI Z358.1-2014, but also ensure wide-area water distribution. This ensures that the areas around the eyes are also covered, and positioning the eyes within the water stream is straightforward. The controlled, even, and, above all, gentle water stream is optimized for flushing chemicals out of the eye.
Using the included B-SAFETY combination mount, the hand-held eye shower can be mounted on the wall or on a table. The sturdy, stainless-steel-sheathed hose, which is 1.5 meters long, ensures easy handling of the shower. The integrated flow regulator ensures the correct spray height and a standard-compliant spray pattern, regardless of the available water pressure. The backflow preventer built into the shower’s handle provides additional protection for the drinking water system.
Technical Description
- ergonomically shaped handle with integrated, adjusting activation made of plastics, valve not self-closing
- Wide-spray, high-performance spray heads angled at 45°, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-fitting Dust cap with a folding mechanism, mounted via a Distributor fork
- Integrated automatic flow regulator: 14 liters per minute, +/-10% tolerance, for a standard-compliant spray pattern at a specified operating pressure range of 2.5 to 5 bar
- integrated backflow preventer to protect the drinking water
- stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
- Sturdy wall and tabletop mount with adjustable shower position, including a mounting kit with an M28x1.5 mm nut and 2 M5 screws for installations in hard-to-reach areas, and a special gasket for sealing against the tabletop surface
- sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- Installation height: 700 mm (± 200 mm)
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014 and EN 15154-2:2025
- DIN-DVGW tested and certificated
accessories
