PremiumLine Safety eye shower in a stainless steel housing, including a Safety shower valve for flush-mounted wall mounting
Safety eye showers in stainless steel housings are installed in laboratory units or mounted on the wall to ensure a barrier-free environment in the laboratory. The eye showers feature a clean, minimalist design with elegant stainless steel surfaces. Pulling down the large handle causes the integrated cover to swing downward, activating the eye wash station. The stainless steel cover also serves as a catch basin to collect and drain most of the water used.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
- EN 15154-2:2006
- ANSI Z358.1-2014
- DIN-DVGW, NW-0417CL0263
Technical specifications
| Mounting type | In-wall installation |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 425 |
| Width (mm) | 505 |
| Length/Depth (mm) | 100 |
| Weight (kg) | 10,6 |
| Operating pressure (bar) | 2,5 – 5,0 |
| Volume flow (l/min) | 14 ±10% tolerance |
| Water connection | 3/4″ female |
| Water outlet / drain | 3/4″ male |
More about this product
Product description
The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure wide-area water distribution. This ensures that the areas around the eyes are also covered, and positioning the eyes within the water stream is straightforward. The controlled, even, and—above all—gentle water stream is optimized for flushing chemicals out of the eye.
The integrated flow regulator ensures the correct spray height and a standard-compliant spray pattern, regardless of the incoming water pressure. The rubber sleeves around the spray head protect the person seeking assistance from impact injuries. The large holes in the spray heads prevent water from pooling and thus prevent mineral buildup. The orange, photoluminescent “OPEN” information sign ensures that the device cannot be mistaken for another in an emergency.
Technical Description
- Polished stainless steel housing, for in-wall installation, dimensions (H x W x D): 425 x 505 x 100 mm, cutout dimensions (H x W): 380 x 460 mm
- Integrated stainless steel swing door, polished, with the Eye shower automatically activated when the door is swung down
- “OPEN” information sign for unambiguous use in an emergency, orange, photoluminescent in accordance with DIN 67510
- 3/4-inch stainless steel ball valve, with swing-door operation, DIN-DVGW tested and approved
- Integrated automatic flow regulator (14 liters per minute) for a standard-compliant spray pattern within a specified operating range of 2.5 to 5 bar flow pressure
- High-performance, wide-spray stainless steel spray heads, polished, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-sealing Dust cap with a folding mechanism, mounted via a Distributor fork
- Includes an information sign for the eye shower on the swing door, compliant with EN ISO 7010 and ASR A1.3, made of self-adhesive PVC film, dimensions 100 x 100 mm, visible from 10 meters away
- Safety shower valve in a separate polished stainless steel housing, mounted on the left or right side of the Eye shower housing
- 3/4-inch stainless steel ball valve, with lever operation, DIN-DVGW tested and approved, 3/4″ female water inlet
- Opening angle 90°, does not close automatically
- Stainless steel lever, polished, length 160 mm
- Sturdy plastic handle, 25 mm in diameter, 90 mm long
- “OPEN” information sign for unambiguous use in an emergency, orange, photoluminescent in accordance with DIN 67510
- Height 425 mm, width 505 mm, depth 100 mm
- Cutout dimensions: 380 x 460 mm
- Installation height: 865 mm (± 200 mm)
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, DIN 12899-3:2009, EN 15154-1:2006, and EN 15154-2:2006
- DIN-DVGW tested and certificated
accessories
