PremiumLine Safety eye shower with Two 45° Spray Heads for table mounting
Permanently installed eye showers are the best solution for many applications in laboratories, warehouses, and industrial settings. These showers are always clearly visible from all sides. The large PUSH lever is photoluminescent, making it easy to locate even in the dark or when visibility is poor. Eye showers with collection basins collect the used water and drain it away.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN 15154-2:2025
• ANSI Z358.1-2014
• DIN-DVGW, NW-0417CL0263
Technical specifications
| Mounting type | table mounted |
|---|---|
| Material | Stainless steel |
| Surface | polished |
| Height (mm) | 260 |
| Width (mm) | 260 |
| Length/Depth (mm) | 100 |
| Operating pressure (bar) | 1,5 – 5,0 |
| Volume flow (l/min) | 14 ±10% tolerance |
| Water connection | 1/2″ male |
More about this product
Product description
The eye shower is equipped with two B-SAFETY high-performance spray heads that not only meet the requirements of EN 15154-2:2025 and ANSI Z358.1-2014, but also ensure wide-area water distribution. This ensures that the areas around the eyes are also covered, and positioning the eyes within the water stream is straightforward. The controlled, even, and—above all—gentle water stream is optimized for flushing chemicals out of the eye.
The integrated flow regulator ensures the correct spray height and a spray pattern that complies with standards, regardless of the water pressure. The rubber sleeves around the spray head protect the person seeking assistance from impact injuries. Dust caps on the spray head protect against dirt and open automatically due to water pressure when the Eye shower is activated. The large holes in the spray heads prevent standing water and thus scale buildup.
Technical Description
- Stainless steel 1/2″ male connection thread, polished, length 60 mm, with mounting kit including a G1/2″ nut and 2 M5 screws for installations in hard-to-reach areas, with a distribution washer, fixed rosette, and O-ring seal against the mounting surface
- 1/2″ female stainless steel ball valve with drain, featuring two drain connections and a sealing plug, with PUSH lever operation, DIN-DVGW tested and approved
- Stainless steel automatic drain
- Stainless steel control panel, 130 mm long, with a large “PUSH” indicator that is photoluminescent, in accordance with DIN 67510
- 1/2-inch stainless steel double nipple
- Integrated automatic flow regulator: 14 liters per minute, +/-10% tolerance, for a standard-compliant spray pattern at a specified operating range of 1.5 to 5 bar flow pressure
- Wide-spray, high-performance spray heads angled at 45°, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-fitting Dust cap with a folding mechanism, mounted via a Distributor fork
- sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- Height 260 mm, total width (including lever) 260 mm
- Installation height: 825 mm (± 200 mm)
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014 and EN 15154-2:2025
- DIN-DVGW tested and certificated
accessories
