Antibacterial Additive for Tank Eyewash Stations
All ingredients used are approved for use in drinking water. It quickly and safely disinfects clear water and keeps it germ-free for up to 6 months. The oxidizing effect of chlorine eliminates not only bacteria but also viruses and most protozoa and fungi. For clear water, not for cloudy water, as suspended solids can impair the effectiveness of chlorine and silver ions. Micropur Forte can be used anywhere where microbiologically unsafe tap water needs to be disinfected for drinking, cooking, or washing.
Hazard warnings:
Use biocidal products with caution. Always read the label and product information before use.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• BAuA registration number in Germany for Micropur Forte 1000F: N-58037
• BAuA registration number in Switzerland for Micropur Forte 1000F: CHZB0371 Micro Forte MF 1000F
• BAuA registration number in Luxembourg for Micropur Forte 1000F: 84/17/L
Technical specifications
| Height (mm) | 120 |
|---|---|
| Width (mm) | 40 |
| Length/Depth (mm) | 40 |
| Weight (kg) | 0,1 |
| Capacity (litres) | 0,1 |
| Dosage | 1 ml per 10 liters of water |
| durability | 2 years from the date of manufacture |
More about this product
Product description
All ingredients used are approved for use in drinking water. It quickly and safely disinfects clear water and keeps it germ-free for up to 6 months. The oxidizing effect of chlorine eliminates not only bacteria but also viruses and most protozoa and fungi. For clear water, not for cloudy water, as suspended solids can impair the effectiveness of chlorine and silver ions. Micropur Forte can be used anywhere where microbiologically unsafe tap water needs to be disinfected for drinking, cooking, or washing.
Directions: Add the product to an empty or half-full water container and immediately fill it with the desired amount of clean water. The resulting turbulence helps mix Micropur Forte with the water. No additional stirring is necessary. If Micropur Forte is added only after the container has been filled, the water must be stirred to ensure the active ingredients are evenly distributed. Dosage: 10 ml per 100 L of water. Allow to sit for 30 minutes. For cold water (< 10°C), extend the time to 2 hours. Use only in clear water. Store in a cool place away from light (< 25°C).
Warning: Toxic to aquatic life with long-term effects. Avoid release into the environment. Keep out of reach of children. Avoid contact with eyes, skin, and clothing (may cause discoloration). Causes skin irritation and severe eye irritation. If on skin, wash with plenty of water. If in eyes, rinse with water for several minutes. Remove any contact lenses if possible and continue rinsing. Absorb spilled material. Dispose of contents/container in accordance with local regulations. First aid: If swallowed, rinse out the mouth, spit out the liquid, and then drink 1 glass of water.
This product is suitable for sale in the following EU countries:
Austria, the United Kingdom, France, Germany, Switzerland, and Luxembourg.
- BAuA registration number in Germany for Micropur Forte 1000F: N-58037
- BAuA registration number in Switzerland for Micropur Forte 1000F: CHZB0371 Micro Forte MF 1000F
- BAuA registration number in Luxembourg for Micropur Forte 1000F: 84/17/L
Technical Description
- Active ingredients: Sodium hypochlorite 19.5 mg/g and silver ions 0.82 mg/g
- Eliminates bacteria and viruses in 30 minutes and preserves water for up to 6 months
- Dosage: 1 ml per 10 liters of water; sufficient for 1,000 liters
- For use on plastic or glass. Test on metal surfaces before use.
- Store in an upright position in the original, unopened packaging and keep at a temperature below 25° C
- Ideal preservative for water in water tanks
- Shelf life: 2 years from the date of manufacture