PremiumLine Adjustable Tie-Rod Valve for Surface-Mounted Wall Installation
B-SAFETY body safety showers are available as a modular system. The safety shower arms and valves can be purchased individually and adapted to on-site conditions. This makes it possible to accommodate nearly any installation requirement.
Installation Instructions
To ensure installation complies with EN 15154-1:2006, make sure that the Safety shower system is designed to be self-draining between the valve and the shower head.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN 15154-1:2006
• EN 15154-5:2019
• ANSI Z358.1-2014
Technical specifications
| Mounting type | For surface-mounted wall installation |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 300 – 1660 |
| Width (mm) | 215 |
| Length/Depth (mm) | 80 |
| Weight (kg) | variable |
| Operating pressure (bar) | 1,0 – 5,0 |
| Volume flow (l/min) | At least 60 liters per minute at 1 bar flow pressure |
| Water connection | 3/4″ female |
More about this product
Product description
The variable pull-rod valve consists of a robust Ball valve approved for drinking water, which can be mounted either to the right or left of the door. The flow rate is at least 60 liters per minute at a flow pressure of 1 bar. An additional guide bracket ensures proper positioning of the pull rod. The pull rod can be ordered in lengths ranging from 300 to 1,660 mm, depending on on-site conditions.
Technical Description
- Ball valve with Pull rod actuation mounted on a stainless steel wall flange; can be installed on the right or left side of the door; DIN-DVGW tested and approved; 3/4″ female water inlet
- Flow rate of at least 60 liters per minute at a flow pressure of 1 bar
- Pull rod with ring handle made of stainless steel, polished, adjustable length (min. 300 mm – max. 1660 mm)
- plastic recessed handle, orange, with ‘OPEN’ signal, luminescent according to DIN 67510
- Stainless steel guide holder for pull rod, polished
- Opening angle 90°, does not close automatically
- “OPEN” information sign for unambiguous use in an emergency, orange, photoluminescent in accordance with DIN 67510
- Installation height for the lower edge of the pull-bar handle according to the standards listed below: 0 to 1,750 mm above the floor
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN 15154-1:2006, and EN 15154-5:2019
accessories
