PremiumLine Body safety shower with Eye-/face wash unit, with catch basin and cover, stainless steel, for floor mounting
Freestanding safety showers are used whenever wall mounting the shower is not possible or when a central first-aid station needs to be established. They are also useful in large warehouses and production facilities. A major advantage is that the shower is clearly visible from all sides. The freestanding safety showers can be customized to meet on-site requirements with a wide range of optional features.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN-15154-1:2025
• EN 15154-2:2025
• EN 15154-5:2019
• ANSI Z358.1-2014
• DIN-DVGW, DVGW, NW-0416CL0425
• DIN-DVGW, DVGW, NW-0417CL0263
Technical specifications
| Mounting type | Floor mounting |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 2300 |
| Width (mm) | 355 |
| Length/Depth (mm) | 630 |
| Weight (kg) | 16,8 |
| Operating pressure (bar) | 1,5 – 3,0 |
| Operating pressure of eye shower (bar) | 2,5 – 5 |
| Volume flow (l/min) | 50 ±10% tolerance |
| Flow rate of eye shower (l/min) | 14–20, with a tolerance of ±10% |
| Water connection | 1 1/4″ female |
| Water drain for eye shower | 1/2″ male |
More about this product
Product description
The B-SAFETY PremiumLine series body safety showers are made of stainless steel and are suitable for use in laboratories and research facilities as well as for harsh industrial environments. The polished stainless steel surface is not only resistant to many chemicals but also offers a modern design for laboratories and cleanrooms.
The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of limescale and maintenance-free, as well as very robust and corrosion-resistant. The limited, even, and above all gentle water stream is optimized for rinsing chemicals off the skin.
Technical Description
- Includes upper and lower 1 1/4″ female water inlets for installation in circulation lines, and 1 1/4″ stainless steel plugs
- Stainless steel base with 4 mounting holes, polished, diameter 200 mm
- 1 1/4-inch stainless steel riser, three-piece, polished, with upper and lower 1 1/4″ female water inlets, total height 2300 mm
- 3/4-inch stainless steel threaded fitting with conical seal, designed for simplified on-site installation
- 3/4-inch stainless steel ball valve, with Quick mounting system and pull rod actuation, DIN-DVGW tested and approved
- Pull rod with ring handle, made of stainless steel, polished, length 700 mm
- plastic recessed handle, orange, with ‘OPEN’ signal, luminescent according to DIN 67510
- 3/4-inch stainless steel wall shower arm, polished, 660 mm reach
- Integrated automatic flow regulator, 50 liters per minute with a tolerance of ±10%, for a standard-compliant spray pattern at a specified operating range of 1.5 to 3 bar flow pressure
- High-performance stainless steel shower head, polished, with an improved spray pattern, corrosion-resistant, virtually limescale- and maintenance-free, very durable, self-draining
- Information sign for a body safety shower in accordance with DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, dimensions 150 x 150 mm, visibility distance 15 meters
- Integrated PremiumLine Eye-/face wash unit with catch basin and cover, for mounting on a standpipe; position and orientation can be freely selected
- Housing, cover, and drip tray made of impact-resistant and UV-resistant ABS plastic; 1/2″ male drain connection
- Integrated hinged protective cover to prevent dirt from getting in
- Triggered by swiveling the cover downward
- 3/8-inch brass ball valve, with lever operation via a hinged protective cover, DIN-DVGW tested and approved
- Brass spray regulator with a very narrow spray pattern, chrome-plated
- with a built-in 3/8-inch flow control valve for adjusting the desired spray height and flow rate
- Includes an information sign for the eye shower on the cover, compliant with EN ISO 7010 and ASR A1.3; dimensions: 170 x 170 mm; visibility distance: 17 meters
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN-15154-1:2025, EN 15154-2:2025, and EN 15154-5:2019
- DIN-DVGW tested and certificated
accessories
