PremiumLine Frost-protected Heated Body Safety Shower with Eye Shower, Stainless Steel, for floor mounting
B-SAFETY’s frost-protected, heated safety showers are equipped with a self-regulating trace heating cable and additional insulation. An integrated thermostat provides additional protection for the heating system. The Safety shower is clad on the outside with stainless steel sheets. This ensures maximum durability even in harsh industrial environments. The modular design with bolted valve covers ensures easy access to valves and fittings during maintenance. Concealed high-performance shower heads prevent vandalism and also deliver high flow rates for rapid decontamination. The shower is activated via stainless steel pull rods or foot-operated controls such as tread plates or foot levers. These showers cannot freeze, even under the most extreme conditions.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN-15154-1:2025
• EN 15154-2:2006
• EN 15154-5:2019
• ANSI Z358.1-2014
Technical specifications
| Mounting type | Floor mounting |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 2300 |
| Width (mm) | 220 |
| Length/Depth (mm) | 790 |
| Operating pressure (bar) | 2 – 8 |
| Operating pressure of eye shower (bar) | 1,5 – 5 |
| Volume flow (l/min) | 50 ±10% tolerance |
| Flow rate of eye shower (l/min) | 14 ±10% tolerance |
| Water connection | 1 1/4″ male |
| Electrical connection | 230 V – 50 Hz |
More about this product
Product description
The B-SAFETY PremiumLine series body safety showers are made of stainless steel and are suitable for use in laboratories and research facilities as well as for harsh industrial environments. The polished stainless steel surface is not only resistant to many chemicals but also offers a modern design for laboratories and cleanrooms.
The body safety showers are equipped with the B-SAFETY high-performance shower head, which not only meets the requirements of ANSI Z358.1 and EN 15154, but is also self-draining, largely free of limescale and maintenance-free, as well as very robust and corrosion-resistant. The limited, even, and above all gentle water stream is optimized for rinsing chemicals off the skin.
Technical Description
- Stainless steel base with 4 mounting holes, dimensions 200 x 200 mm
- 1 1/4-inch stainless steel riser, two-piece, with a 1 1/4″ male water inlet at the bottom; total height 2300 mm
- 1 1/4-inch stainless steel connecting tube, 75 mm long
- 1 1/4-inch stainless steel ball valve, with Pull rod actuation, DIN-DVGW tested and approved
- Stainless steel pull rod with ring handle, 700 mm long
- 1 ¼-inch stainless steel wall shower arm, 600 mm reach
- High-performance shower head made of chemical-resistant plastic, black, with an improved spray pattern, corrosion-resistant, largely limescale-resistant and maintenance-free, very durable, self-draining
- Insulation made from a rock wool molded package, noncombustible, in accordance with DIN 4102
- Heating via a self-regulating heating cable, power 10 W/m, electrical connection 230 V – 50 Hz
- Outdoor air thermostat and energy-saving circuit (traces heat turns off at 11° C, turns on at 4° C)
- External piping casing and insulation made of a bolted stainless steel housing, easily removable for maintenance work, including green/white warning strips for better visibility of the shower
- Information sign for a body safety shower in accordance with DIN EN ISO 7010 and ASR A1.3, self-adhesive PVC film, dimensions 150 x 150 mm, visibility distance 15 meters
- Integrated PremiumLine safety eye shower with two 45° spray heads, mounting height 950 mm; the orientation of the eye shower can be freely selected on site
- Stainless steel connection pipe for easy installation and alignment of the shower, polished
- 1/2-inch stainless steel ball valve, with PUSH lever operation, DIN-DVGW tested and approved
- Stainless steel control panel, polished, length 130 mm, with large “PUSH” indicator, photoluminescent, in accordance with DIN 67510
- High-performance spray heads made of polished stainless steel, angled at 45°, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-sealing Dust cap with a folding mechanism, mounted via a Distributor fork
- Integrated automatic flow regulator, 14 liters per minute, +/-10% tolerance, for a standard-compliant spray pattern within a specified operating range of 1.5 to 5 bar flow pressure
- sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- Suitable for use in Zone 1 and 2 hazardous areas; all electrical components are explosion-protected; includes a risk assessment in accordance with the Industrial Safety Regulation regarding non-electrical and electrical explosion protection
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN-15154-1:2025, DIN EN 15154-2:2006, and EN 15154-5:2019
- DIN-DVGW tested and certificated
accessories
