PremiumLine Safety shower valve with Drain, for flush-mounted wall mounting
B-SAFETY body safety showers are available as a modular system. The safety shower arms and valves can be purchased individually and adapted to on-site conditions. This makes it possible to accommodate nearly any installation requirement.
Installation Note:
To ensure installation complies with EN 15154-1:2006, make sure that the safety shower system is designed to be self-draining between the valve and the shower head.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
Downloads
Assembly and Operating Instructions
Norms and Approvals
• EN-15154-1:2025
• EN 15154-5:2019
• ANSI Z358.1-2014
Technical specifications
| Mounting type | For flush-mounted wall mounting |
|---|---|
| Material | Stainless steel, plastic |
| Colour | silver-gray, orange |
| Height (mm) | 200 |
| Width (mm) | 200 |
| Length/Depth (mm) | 130 |
| Weight (kg) | 1,35 |
| Operating pressure (bar) | 1,0 – 5,0 |
| Volume flow (l/min) | At least 60 liters per minute at 1 bar flow pressure |
| Water connection | 3/4″ female |
| External water outlet (mm) | 8 mm |
More about this product
Product description
The emergency shower valve consists of a sturdy Ball valve approved for drinking water. The flow rate is at least 60 liters per minute at a flow pressure of 1 bar.
Technical Description
- Stainless steel cover plate with 4 mounting holes (4.50 mm in diameter) in the corners
- Stainless steel ball valve, DIN-DVGW tested and approved
- Includes 2 stainless steel screw fittings for easy on-site installation; 3/4″ female water inlet
- Flow rate: at least 60 liters per minute, with a tolerance of +/-10% at a flow pressure of 1 bar
- Adjustable clamping lever handle made of die-cast zinc, with an orange plastic coating, stainless steel bushing, lockable with a tool, total length 110 mm
- Operated by a pivot lever, 90° opening angle, does not close automatically
- Integrated drain valve for automatic or manual drainage
- “OPEN” information sign for unambiguous use in an emergency, orange, photoluminescent in accordance with DIN 67510
- Installation height for levers according to the standards listed below: 0 to 1,750 mm above the floor
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN-15154-1:2025, and EN 15154-5:2019
accessories
