PremiumLine Frost-protected, Self-Draining Eye Showers with Surrounding Protective Cage and Underfloor Activation, Stainless Steel, for Floor Mounting
Safety shower stations are first-aid stations equipped with a Safety shower. The surrounding protective cage provides good protection against damage and ensures the station is clearly visible from all sides. The large foot pedal is used to activate the Safety shower. All safety shower stations are designed to be self-draining and are therefore suitable for use in hot environments. As a custom option, the showers are also available with an underfloor activation mechanism, making them frost-protected.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN 15154-2:2025
• ANSI Z358.1-2014
• DIN-DVGW, NW-0417CL0263
Technical specifications
| Mounting type | Floor mounting |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 2125 |
| Width (mm) | 850 |
| Length/Depth (mm) | 1400 |
| Weight (kg) | 41,0 |
| Operating pressure (bar) | 2,5 – 5,0 |
| Volume flow (l/min) | 14 ±10% tolerance |
| Water connection | 3/4″ male |
| Water outlet / drain | 1 1/4″ male |
| Underfloor release | Yes |
More about this product
Product description
The eye shower is equipped with two B-SAFETY high-performance spray heads, which not only meet the requirements of EN 15154-2:2006 and ANSI Z358.1-2014, but also ensure wide-area water distribution. This ensures that the areas around the eyes are also covered, and positioning the eyes within the water stream is straightforward. The controlled, even, and—above all—gentle water stream is optimized for flushing chemicals out of the eye.
Technical Description
- Frame made of stainless steel tubing, dimensions (H x W x D): 960 x 850 x 900 mm
- Eye shower activated by a foot pedal made of hot-dip galvanized steel; secured to an angled guide via a stainless steel cable; dimensions (W x D): 800 x 800 mm
- Stainless steel angle elbow, with a stainless steel mounting bracket on the standpipe
- Stainless steel ball valve for in-floor activation, installed in a stainless steel enclosure, with a 1000 mm pull-rod actuator, 3/4″ male water inlet, DIN-DVGW tested and approved, with automatic drainage at a depth of 1000 mm
- Stainless steel base with 4 mounting holes, polished, dimensions 200 x 200 mm
- 1 1/4-inch stainless steel riser, two-piece, polished, total height 1050 mm
- Integrated PremiumLine Safety eye shower with stainless steel drip tray, mounting height 970 mm
- Stainless steel connection pipe for easy installation and alignment of the shower, polished
- Stainless steel drip pan, 275 mm in diameter, polished, 1 1/4″ male drain connection
- High-performance, wide-spray stainless steel spray heads, polished, with a plastic spray plate, largely free of calcification, including a rubber protective cover and a tight-sealing Dust cap with a folding mechanism, mounted via a Distributor fork
- Integrated automatic flow regulator: 14 liters per minute, +/-10% tolerance, for a standard-compliant spray pattern at a specified operating pressure range of 2.5 to 5 bar
- sign for eye shower according to EN ISO 7010 und ASR A1.3, self-adhesive PVC-film, 100 x 100 mm, viewing distance 10 metre
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014 and EN 15154-2:2025
- DIN-DVGW tested and certificated
accessories
