PremiumLine Safety shower valve in a Stainless Steel Housing with Drain, for flush-mounted wall mounting
B-SAFETY body safety showers are available as a modular system. The safety shower arms and valves can be purchased individually and adapted to on-site conditions. This makes it possible to accommodate nearly any installation requirement.
Installation Note:
To ensure installation complies with EN 15154-1:2006, make sure that the Safety shower system is designed to be self-draining between the valve and the shower head.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
• EN-15154-1:2025
• EN 15154-5:2019
• ANSI Z358.1-2014
Technical specifications
| Mounting type | For flush-mounted wall mounting |
|---|---|
| Material | Stainless steel |
| Colour | silver-gray |
| Height (mm) | 400 |
| Width (mm) | 300 |
| Length/Depth (mm) | 161 |
| Weight (kg) | 3,9 |
| Operating pressure (bar) | 1,0 – 5,0 |
| Volume flow (l/min) | At least 60 liters per minute at 1 bar flow pressure |
| Water connection | 3/4″ female |
More about this product
Product description
The emergency shower valve, housed in a stainless steel casing, is installed in the wall and features a discreet design. The stainless steel cover can be removed for maintenance. The robust ball valve is certified for potable water and ensures a flow rate of at least 60 liters per minute at a flow pressure of 1 bar. It is operated by a stainless steel lever with a sturdy plastic handle. Installation at handle height is recommended for this emergency shower valve. The integrated drain valve ensures that water can drain between the shower head and the valve.
Technical Description
- Stainless steel housing for in-wall installation, removable cover for maintenance, dimensions (H x W): 400 x 300 mm, installation dimensions (H x W x D): 350 x 251 x 62 mm
- 3/4-inch stainless steel ball valve, with lever operation, DIN-DVGW tested and approved
- Includes 2 stainless steel screw fittings for easy on-site installation; 3/4″ female water inlet
- Flow rate: at least 60 liters per minute, with a tolerance of +/-10% at a flow pressure of 1 bar
- Operated by a polished stainless steel lever, 160 mm long, 90° opening angle, does not close automatically
- Sturdy plastic handle, black, 25 mm in diameter, 90 mm long
- Integrated drain valve with automatic or manual drainage, mounted on the outside of the lid
- “OPEN” information sign for unambiguous use in an emergency, orange, photoluminescent in accordance with DIN 67510
- Installation height for levers according to the standards listed below: 0 to 1,750 mm above the floor
- in accordance with BGI/GUV-I 850-0, DIN 1988, and EN 1717
- in accordance with ANSI Z358.1-2014, EN-15154-1:2025, and EN 15154-5:2019
accessories
