ClassicLine Mobile Tank Eyewash Station with Stainless Steel Tank on a Hand Cart
Antibacterial additive for tank eyewash stations:
A water inlet for a safety shower is not always available in every location where there is a potential hazard from corrosive or flammable substances. Especially on sprawling industrial sites, at construction sites, or in warehouses, installing water inlets requires a great deal of effort.
Or call us directly at: +49 40 538 092 70
(Mo – Thu from 8 a.m. to 5 p.m. and Fri from 8 a.m. to 14 p.m.)
- EN 15154-4:2009
- ANSI Z358.1-2014
Technical specifications
| Mounting type | on a handcart |
|---|---|
| Material | Stainless steel, plastic |
| Colour | silver-gray |
| Height (mm) | 850 |
| Width (mm) | 450 |
| Length/Depth (mm) | 450 |
| Filling capacity (litres) | 14 |
| Filling pressure (bar) | 6 |
| Volume flow (l/min) | 7 (1.85 GPM) +/-10% tolerance |
| Rinse time (minutes) | 2 |
| Water filling | Hinged lid (secured with screws) |
| Compressed air connection | Tire valve |
| Weight (kg) | 13,8 |
| Hose length (mm) | 1500 |
More about this product
Product description
To provide cost-effective first aid in these locations as well, portable Tank eyewash stations can be used. Portable eye showers with a 14-liter tank capacity are most commonly used. However, showers with a flushing duration of less than 15 minutes should only be used as a temporary measure until a permanently installed station can be reached.
The B-SAFETY ClassicLine BR960005 Tank eyewash station features a 14-liter stainless steel tank. It is filled through the large hinged lid located on top. Afterward, a minimum filling pressure of 7 bar must be reached via the tire valve located to the side of the tank. The shower is then activated by operating the connected Hand-held eye shower, and the water in the tank is completely drained through the Hand-held eye shower.
Technical Description
- for mobile use or when there is no water inlet available
- Stainless steel tank with a capacity of 18 liters, for a water filling volume of approximately 14 liters, mounted on a handcart with solid rubber tires
- Water inlet via a large hinged cover on the tank; tamper-resistant design with screw connections
- Inflate using compressed air at a pressure of 6 bar; connect to the tire valve
- built-in pressure relief valve that opens at approximately 6 bar of fill pressure
- Pressure loss of approximately 0.2 bar after one month
- Triggered by activating the hand-held eye shower
- Hand-held eye shower with a Spray head that sprays vertically upward; mounted to the tank using a wall bracket
- Handle with an integrated, locking release lever made of plastic; valve does not close automatically
- Wide-spray, high-performance spray head with plastic spray plate, largely free of calcification, includes rubber protector and tight-sealing dust caps with folding mechanism
- Built-in automatic flow regulator: 7 liters per minute (1.85 GPM), for a rinse time of approximately 2 minutes
- built-in check valve
- stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
- Information sign for an eye shower in accordance with DIN EN ISO 7010 and ASR A1.3, affixed to the tank; self-adhesive PVC film; dimensions 150 x 150 mm; visibility distance 15 meters
- Dimensions (H x W x D): 850 x 450 x 450 mm
- in accordance with ANSI Z358.1-2014 and EN 15154-4:2009
accessories
